Our Blog - Pro Landscape

Our Blog - Pro Landscape

29
Jun

Running Bond vs. Herringbone: Stone Layouts

bhavya gada
No Comments

If I want the short answer: running bond is usually the better fit for patios and walkways, while herringbone is often the better fit for driveways and other heavy-use areas. Here’s the simple breakdown: Running bond uses offset rows and gives a clean, straight look. Herringbone uses a zigzag pattern and holds together better under

29
Jun

Retention vs. Detention Basins: Planting Differences

bhavya gada
No Comments

The short answer: I’d plant a retention basin like a wetland and a detention basin like a flood-and-drought meadow. If water stays in the basin all year, plants must live in wet soil or standing water. If the basin drains within 24–72 hours, plants must handle short floods, dry periods, slope erosion, mowing limits, and

29
Jun

Top Studies on Cistern Water Filtration

bhavya gada
No Comments

If you use cistern water, filtration is not optional. The studies here point to one clear setup: block roof debris early, cut sediment before storage, and use UV or chlorine if the water will be used for drinking. I found the same pattern across the research: Roof runoff often carries bacteria, including E. coli, coliforms,

29
Jun

Best Practices for Sediment Control in Hardscaping

bhavya gada
No Comments

If water leaves a hardscape job carrying mud, sand, or mulch, the site plan failed. I’d boil this whole topic down to four moves: plan drainage early, limit exposed soil, install controls before digging, and keep checking them after storms. For a homeowner or property manager, that means looking at slopes, runoff paths, drain inlets,

29
Jun

Retention Basins for Maryland Homes: FAQs

bhavya gada
No Comments

If you live near a subdivision pond in Maryland, it likely needs regular care, clear ownership, and the right design to keep runoff under control. One inch of rain on 1 acre of hard surface can create about 27,000 gallons of runoff, and stormwater adds about 17% of nitrogen and 17% of phosphorus going into

28
Jun

Checklist for Planting Low-Maintenance Garden Beds

bhavya gada
No Comments

If I want a garden bed that needs less work later, I have to get four things right from the start: site, soil, plant spacing, and first-year care. A bed like this is not about adding more plants. It is about matching plants to the spot, fixing drainage problems before planting, spacing for full size,

28
Jun

Top 7 Pollinator-Friendly Practices for Maryland

bhavya gada
No Comments

If I want to help pollinators in Maryland, I need to do seven things: plant natives, keep flowers blooming from spring to fall, build layers, leave stems and leaf litter in place, add shallow water, avoid pesticides, and shrink lawn space. Maryland yards can support a lot of pollinators, but the setup has to fit

28
Jun

Hydrological Evaluations for Maryland Landscapes

bhavya gada
No Comments

A hydrological evaluation tells me one thing fast: where water goes on a Maryland property, and what to do about it. If I see soggy grass, mulch washing downhill, or water moving toward the house, I start with slopes, hard surfaces, soil drainage, and overflow paths. Even a 1-inch rain on a 1,500-square-foot roof can

28
Jun

Best Outdoor Cooling Systems for Maryland Homes

bhavya gada
No Comments

If I had to sum it up in one line: for most Maryland homes, open spaces do best with misting fans, covered spaces do best with wet-rated fans, and evaporative coolers are hit-or-miss once humidity passes 60%. Maryland summers are hot, humid, and sticky. When humidity climbs past 60%, some outdoor cooling systems lose a

28
Jun

Checklist for Creating Wildlife Shelters with Native Plants

bhavya gada
No Comments

Most yards have plants. Far fewer have shelter. If I want birds, pollinators, and small animals to stay, I need to build cover they can use in every season. Here’s the short version: I start by checking sun, soil, moisture, and thin cover I look for missing layers: trees, shrubs, and ground plants I aim